Kit d'éclairage pour Bonsai Tree 10281

Sauvegarder30%
LightailingUGS :LGK512
filler

Prix:
$25.89 $36.99

 Apportez un éclat magique à votre Bonsai Tree 10281 . Ce kit d'éclairage est spécialement conçu pour les Lego Creator Series Bonsai Tree 102811 . Ce modèle Lego très détaillé est un spectacle en soi, mais lorsqu'il est associé au kit d'éclairage Lightailing, le charmant modèle prend vie, non seulement pendant la journée mais aussi la nuit. 

INSTALLATION  

Suivez le livre d'instructions étape par étape Lightailing pour allumer votre Bonsai Tree 10281, quelque chose d'incroyable se produira la nuit. Tous nos kits sont plug and play - aucune connaissance en électronique n'est nécessaire !

►Vérifiez les composants dans la boîte assurez-vous que tout dans la description vient.
►Naviguez sur le Mode d'emploi, ce qui peut être d'une grande aide lors de l'installation ultérieure.
►Testez le produit pour voir s'il fonctionne correctement avant l'installation.
►L'alimentation doit être inférieure à 5v pour éviter de brûler.
►Préparez à l'avance 3 piles AA ou des séparateurs de briques.

EXPÉDITION ET GARANTIE

Livraison

►La majorité des pays ont des délais de livraison d'environ dix jours ouvrables.
►En sélectionnant votre pays et votre région et en entrant votre code postal dans le formulaire "Estimation de l'expédition" ci-dessous, vous pouvez obtenir des informations plus précises sur les délais et les frais de livraison.

garantie

►Le produit Lightailing bénéficie d'une garantie de deux ans à compter de la date de vente.
►Le produit Briksmax bénéficie d'une garantie d'un an à compter de la date de vente.

Retour

►Si vous souhaitez annuler la commande, il est important de le faire avant l'expédition.
►Si votre commande a déjà été expédiée, vous pouvez refuser de la signer à son arrivée, mais veuillez nous la retourner dans son état d'origine (non utilisée et non ouverte).
►S'il y a des problèmes de qualité avec l'article à la suite de notre erreur, vous pourrez bénéficier d'un échange dans les 15 jours suivant la livraison de la commande.

Si vous souhaitez en savoir plus, veuillez consulter leRetours et remboursements Page Politique.

NOTE IMPORTANTE

►Cet ensemble est un kit d'éclairage LED uniquement, les ensembles Lego ne sont pas inclus.
►Les produits contiennent de petites pièces qui peuvent représenter un risque d'étouffement.
►Les produits ne sont pas destinés à être utilisés par des enfants de moins de 6 ans.
►Les enfants qui utilisent nos produits le font sous la surveillance d'un adulte.

Reviews

Customer Reviews

Based on 3 reviews
33%
(1)
33%
(1)
0%
(0)
0%
(0)
33%
(1)
B
B.C.
Nice looking but required modifications and glue

This was my first Lightailing kit install and the difficulty was higher than I was expecting. Still I was able to get the kit installed and it does look great with minimal wires showing when everything is done. It's also wired so you can still separate the 3 pieces and display them spaced out if you'd prefer.

The kit is also very bright! So bright my camera had trouble taking pictures in a 100% dark room. The product pictures are very accurate, and the colors match very well and complement the kit.

Battery life is also great so far. I've had it going for a few hours now on rechargeable batteries and it's still very bright. I have not tried with a USB charger but I'm assuming it will be brighter as the instructions state.

That being said there were some issues. The biggest one being that the pink LED that goes in the purple flower would not stay attached to the green brick. Lightailing sent me out another kit but the replacement kit had the same issue. I ended up having to sand the stud down then super glued the LED to the piece using Super Gold to prevent fogging. It's not a big deal since replacement green pieces are easy to find and not expensive if I ever want to remove the LEDs but it's something worth mentioning since it requires glue and sanding.

The red LED for the red flower also had a similar issue but I was able to correct that by sanding down the green stud that it attached to. After a little bit of sanding it popped on snug but still this was another modification. At least this one didn't require gluing.

I also wish that they included more wire control tubing after the shrink wrap. The sliding tube for wire control is a great idea but it feels way too small for the amount of wire hanging out. Using 3 tubes instead of one would really help with wire management.

I think it might just be an issue with the green 1x1 studs that Lego uses since all the other LEDs went on fine. Still I had to take one star off due to the modifications and gluing. I think that the gluing issue can be resolved by using a square 1x1 instead of round 1x1 for the purple flower since the red square LED did snap on with minimal sanding.

Even with these issues I'd recommend the kit if you're looking for a challenge that results in a very pleasant outcome. Lightailing support was also great and did send me a replacement kit very quickly when I ran into issues.

B
Bernard H.
Lego flower lights

Nice set easy to use
Great purchase thanks

L
L.C.
As good as the picture

I just finished this and it looks awesome. Vibrant, bright colors. This was my first set of Legos (and lights) since I was a kid. Super fun! The video instructions helped in some hard to understand parts.

Paiement et sécurité

American Express Apple Pay Diners Club Discover Google Pay JCB Mastercard PayPal Visa

Vos informations de paiement sont traitées en toute sécurité. Nous ne stockons pas les détails de votre carte de crédit et n'avons pas accès à vos informations de carte de crédit.

Tu pourrais aussi aimer

Vu récemment